Artemis PP700 regulator
Artemis PP700 Tuning Regulator By Huma-Air
26 Reviews | Add review

Huma-Air tuning pressure regulator for the Artemis Spa PP700 pistol. Setup your pistol with the best shot to shot concistancy

Default delivery time

On stock

€ 85,00
Price per pc.

Stock :

Quantity: 
Order

Huma-Air Tuning Regulator For The Artemis PP700


Unfortunately the original "constant pressure valve" the Artemis (Spa / SMK)  PP700 series pistol is not always very concistent. So we made a tuning regulator that replaces the original chinese one and you will have a great concistant shotstring in a minute!
This Huma-Air regulator is placed inside the pressure tube and stands on the valve house body. The orginal regulator is bridged so it had no more infuence on the shooting behavior.
It is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

 

The benefits of the Huma-Air,Artemis PP700 tuning regulator are:

  • Higher accuracy of your pisol due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Designed for a wide pressure range 85-150 bar
  • Easy to adjust without the need of a regulator tester because of the clear pressure scale on the regulator
 

When you order your Huma-Air, Artemis PP700 tuning regulator will receive:

  • Your regulator preset to your own wishes;
  • A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
  • We will include a “Huma-Air regulated” breech sticker;
  • A PDF download link for fitting your regulator
 

Huma-Air Quality Control  


Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.

 

Pressure settings of the Huma-Air, Artemis PP700 tuning regulator

 

The tuning regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. 

If you have a 6 ft/lbs UK version, please note:

There are 2 types sold in UK. One model works the same as the FAC model with a regulator pressure of around 100 bar and is mechanical restricted.
The other model works on a pressure of about 35-50 bar.
Please check you pistol by watching the reservoir pressure on the pistol's gauge when the pelletspeed starts to drop so you can select the correct model. 
If your pelletspeed drops around 35-50 bar you can note this in the order process as "UK version 35 bar" so we can produce it for you.


 

Shipping & payment


We ship worldwide with tracked priority shipping. We ship these pneumatic parts well packed for safe and undamaged arrival in the country of destination. As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.

You can pay safely and secure online by means of all major payment providers, like paypal, and credit cards companies.

 

Order by:

Add review

Review must be approved by an administrator before being posted.

Rik - 08-01-2021 19:50

Fantastic! After installation and some finetuning, I managed to get ca 60 shots, average 207 m/s (+/- 2,5 m/s) = 11,5J on 1 220 bar fill. Didnt test on higher V0 yet because this speed is more than enough for me.
Great little thing, and quick service of Huma!

SirParks - 22-11-2020 21:41

Before he shot string was all over the place. It really seemed like there was no regulator. As it started out a bit slow in FPS then slowly increased and tapered off for a bit before dropping. Now with the new Huma each shot is within just a few fps from start until it falls off the regulator. I am shooting 7.9 grain JSB's at 720 fps and the shot count increased from about 15 shots with a spread of 20fps to 25 shots with a spread of 5fps.

B.C. - 10-11-2020 18:32

At first I was a bit anxious about installation since the written instructions seemed not all that clear to me.
However, after taking the gun apart the instructions became quiet obvious. All in all installation was a breeze.
The regulator came set at 115bar. At this setting I got 22J with JSB Jumob’s, a lousy shot count and a very loud report (even with silencer). I lowered the reg pressure down to 100bar (20J) and tinkered a bit with the hammer spring. This got me quickly at the desired 16J. The gun is whisper quiet now. Ideal for backyard plinking.
Speeds are extremely consistent and creep is eliminated.
100% satisfied. I highly recommend this!
Thanks

Nelson86m - 22-10-2020 23:50

Great product, easy to install and works perfect. Will be upgrading more guns with huma regulators. Also super fast shipping to the US.

Juanjo - 19-06-2020 13:05

Formidable, instalación sencilla y efectividad del 100%.
Regulacion excelente, ahora consigo 11 tiros a 217m/s. Regulada a 130bares.
Sin duda imprescindible para la ps1 / pp700.
Gracias huma!

Javier - 17-05-2020 10:54

Easy installation and very stable pressure. Good service. Recommended to upgrade the original pressure reduction valve.

Sal D. - 24-04-2020 20:50

Ordered this the day I ordered my PP700Sa planning on not messing around with the stock reg. I have known of Huma for years and how good they were so I went on that. Well... I did all the usual Forumn mods to the gun and put in the Huma, in under 100 pellets I settled on 115 bar with JSB 18.13 Diablos. Set to the knee of the curve 632 FPS (16FPE) and am getting 25 shots from 220bar to 210bar. Awesome because that was my target power/shot count. Standard Deviation is 1 and Extreme Spread it 4 ! I can not believe how well this is performing with out any creep I may and and time between shots is as long as it takes to load another pellet and cock the hammer. I would highly advise Huma! I got the package in 7 days I might add. The only thing is I wish they gave me another sticker for both sides of the gun. LOL

Ian Causton - 03-03-2020 20:58

This is the 4th Re
Huma Reg i have fitted to a PP700 it was a .22 model and could onlu het 3.5ft lbs fom it.
on deper inspection of the transfer port/block it had a 2.5mm hole whereas all the previous guns had a 4.5mm hole.
Drilled to out to 4.5mm and all was well,6ft Lbs plus tuned down to 5.60ft lbs with the hammer spring
Great reg and easy to fit.

Veradium Air - 06-02-2020 20:58

Great product have never had an issue one with operation and customer service is responsive. Would be nice for USA distrbuter to carry more but well get there.

Kevin Beaulieu - 12-11-2019 18:28

Kevin from Canada ...to all that is sceptable about installing a regulator ..this is my second one and it is proven to be the best upgrade to add to your PCP airguns ...I own 4 and will be adding Huma regs to them all..price is increased shot count with no deviation of pellet speed when tank is full till it drops off the set pressure...witch translates to improved accuracy...to me a must have

Vagi - 01-08-2019 09:58

Game changer. Easy to fit, just get it

Anderson - 16-06-2019 18:04

I’m still learning how to properly tune everything to my needs but the quality of this regulator is very good and customer service was responsive and helpful when I had questions about Instalation.

François Fouché - 08-05-2019 16:34

Huub , im yet to find a better regulator for airguns on the market .I have Huma's in a couple of different rifle and are 100% happy with all of them .Your backup and support for your product is even better .Thanks for supporting Airgun sport with a great product .

François Fouché - 08-05-2019 16:23

Huub , I am yet to find a better regulator for airguns on the market . I have several Humas on different air rifles and are 100% happy with all of them.Your backup and support for your products is even better.Thanks for a great product to promote the sport .

Ian Causton - 20-04-2019 16:52

I have a 700W and a 700S-A consistency was rubbish. Set to 5.5ft lbs (uk) it would easily creap up to over 9ft lbs and one scansion 12.5ft lbs. I prefer not to spend time in HMPS for 5 years.
After fitting Huma regs to both my guns, are legal and consistent. Made a good cheap gun into a terrific bit of kit.
Arrived Within two weeks and dead simple to fit. 100% recommendation

Simon - 24-01-2019 00:19

Super easy install and setup. No more creep! Tuned for 85 shots at 8fpe with 10fps extreme spread.

Ciaran - 14-01-2019 12:11

I'm UK based and so limited to a max muzzle energy of 6 FT/LB. I'd been using a PP700W with the standard Artemis regulator disabled. That device is actually more like a controlled leak, given if you wait long enough, the high pressure reservoir side simply equalises the low pressure side and so the muzzle energy is very heavily affected by the time in between shots.

I used the pistol with the Artemis regulator removed and from 130 BAR down to 90 BAR and where the rotating breech bore diameter was restricted so that the pistol generated an absolute peak muzzle energy of 5.7 FT/LB at the mid point of 110 BAR. That arrangement was accurate and stable and if the pressure was increased beyond 130 or decreased below 90 BAR, the pistol remained UK legal. However it would only gave a maximum of 20 shots before the power levels nose dived - meaning that when on the range you were forever having to fill the reservoir.

With the Huma regulator set to around 50 BAR (I'm using a 177 barrel) and the reservoir filled to 220 BAR, I can run an unrestricted rotating breech port and obtain 5.3 FT/LB consistently for 52 shots before the pistol goes off-regulator. The deviation sits around 10 FPS

The regulator itself is a simple belleville stack arrangement and installation is correspondingly easy (it was fitted in my pistol and tested within 20mins of being delivered). I can heartily recommend it, as it offers significant improvement for a reasonable price.

Ciaran - UK

John - 24-09-2018 10:16

Easy enough to do without any special tools, if you're confident in your abilities then it should be easy. Just need some range time now so I can do some proper chrono readings

Stephen cook - 10-09-2018 11:57

After a few weeks using the stock regulator on the PP700SA purchasing a HUMA reg was essential for me.
So simple to choose the pressure you want and that gave me the fps I wanted then slightly reduce the hammer spring tension while watching the cronograph until the fps just dropped slightly, make sure it's all within my UK limits. and shoot away.
10fps spread just wonderful.
Thanks for producing a product that just fits and no messing around.

Donny - 07-07-2018 05:38

The Huma regulator for the PP700 is an absolute game changer for tuning and consistency! I recommend it to anyone why gets a pp700 as a must have. First of all your shot could will increase, regardless of power level. The factory "regulator" is just a bleed valve at best, and will not be consistent from a full fill. The Huma is also adjustable up to a higher set point, meaning you can reach higher regulated power levels than you can without. As other have mentioned, the marked settings on the regulator make tuning a breeze, and they are pretty dang accurate too. If you're in a region that has a 5-6fpe limit, you will get A LOT of shots with this reg. I happen to be in a place where there is no limit on power. I'm getting 32 shots at 13-15fpe depending on pellet weight on my tuned pp700. That is with a 67cc air cylinder!

I have owned Huma regulators for every airgun I have, and will never use anything else. They work. They're accurate. They're easy to rebuild if you ever have to. Most of all, Huma's customer service is second to none. I highly recommend their products!

Joe - 12-05-2018 08:15

Excellent. Fitted straight into my artemis pistol and instantly a consistent 5.7ftlb. Highly recommended. Excellent build quality.

Geoffrey Gould. - 16-04-2018 22:22

I have purchased a number of Huma regulators,for Air Arms, having found the 'bleed valve' varying in pressure when the air pressure was getting low enough to put the ft-lbs over our limit. (UK. 6FT-LBS). then thought that the answer for the pp700. would be Huma, It is excellent and made a difference bringing the pistol to a real quality item, for a very reasonable sum.
Many many thanks, a superb job.
Yours sincerely.
Geoffrey Gould.

R0B - 26-02-2018 11:59

This is my second reg from Huma for the PP700. The first was delivered promptly and was well packaged. intructions were straightforward and the reg has met all my performance expectations. Not a cheap upgrade for what is a cheap pistol, but worthwhile.

Jason b - 31-12-2017 00:55

It helped me get the power I wanted and maximize shot count
You know where you stand with the scale marks
Easy to adjust and note
Stock reg it was going from mid 500s to mid 800s
I can't be having that living in the uk
I will get 5 years my final adjustments was 16 fps ES

Bob Pratl - 08-11-2017 11:27

Great product, fit, quality and number one customer service.

Steven Pomfet - 05-11-2017 16:34

Excellent piece of kit, vastly improved power consistency. Highly recommend this regulator for Artemis PP700S-A owners.

Thank You HUMA.

More reviews