Benjamin Marauder Tuning Regulator With Pressure Gauge Connection 5 13
Benjamin Marauder regulator with pressure gauge connection
Benjamin Marauder Tuning Regulator With Pressure Gauge Connection
Reviews | Add review

Huma pressure regulator with pressure gauge connection for the Benjamin Marauder airrifle.

Default delivery time

On stock

€ 97,50
Price per pc.

 

Fields marked with a * are mandatory
Quantity: 
Add to Cart

Benjamin Marauder Tuning Regulator


For the Benjamin Marauder we have a tuning regulator with a combined pressure gauge connection that can be pushed into the pressure tube. It will give your Benjamin Marauder a better shotcount and a full flat shotstring immediately. The pressure gauge can be screwed inside the regulator body and will indicate the regulated pressure.
 

The benefits of this tuning regulator for your Marauder:

  • Higher accuracy of your Benjamin Marauder due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maxiumum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage 

 

When you order one of our regulators you will receive:

  • Your regulator preset on to your own wishes
  • A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
  • We will include a “Huma regulated” breech sticker
  • Fitting instructions as pdf download

 

Pressure settings of the Benjamin Marauder Tuning Regulator

Your Marauder regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

 

Huma-Air Quality Control

Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Add review

Thank you very much for taking the effort to review our product.

This review will not be displayed immediately, since it first needs to be approved by a moderator. Once the review has been approved, it will be displayed on this page.

All the best

Team Huma-Air

Ryan navio -

I really love the huma reg that i ordered, staff are really helping on what i need.. really appreciated your great help..i got my gen2 regulator and it was set at 137 bar.. so happy with the result and they gave me an extra oring kit... highly recomended huma... thank you so much..

Jim -

Excellent product.

Thane -

Solid and precise build quality. Regulation is even with no creep up in pressure. 32 shots in a row .25 cal @ 857 FPS and all within 1.5% velocity-incredible!

Jiří Stach -

All O.K.

Maolin -

Shipping to USA was much faster than I expected. For my Marauder air rifle .22cal installation is straightforward since documents are readily available from Huma-air web site. Regular was preset to 2000psi I got more than 40 consistent and accurate shots from 3000-2000psi. 5 shot grouping under a dime, 10-shot grouping usually under a penny (excluding 1 or 2 flyers somethimes) at 40 yards. It also came with a regulator rebuild kit

Chris N. -

Works as advertised. Gen 1 Marauder .22. Set at 160bar, crono'd between 879-881fps for 14.3g pellets up to about 36 shots. I have about 200 shots on the reg so far. I forgot to open my valve set screw all the way so i expect a few more fps once i do. Harbor freight here in the states sells a really long flat screw driver for about $4. Makes adjusting regulator in place a snap. Grouping is way more predictable. Averaging .25 inch grouping @ 25yrds. Next purchase will be a better barrel.

Lukas -

Thank's Huma ..this is a very nice product!! it works very great and exactly in my Mrod cal.22
34 shots at 44 fpe.. That's it!!
I order the same for my Ev. Rainstorm!
Thanks for support

Zachary Hoy -

All I can say is WOW! My good old trusty Mrod has been resurrected from the very back of the cabinet and is back in rotation now! It was an easy install, workmanship is top notch, shipping was incredibly fast, and I went from refilling her after 2 full mags to keep es within 3% to 44 shots with jsb king 25gr at 845-850 fps for 40 fpe. In addition its now more quiet, much easier to cock than my war ssg, and it seems as if I shoot forever before refilling. This was my first regulated experience and will never go back. All of my guns will have regs before pesting season in a few months. All with HUMA regs!!!!

Tim (Shorty on GTA) -

Huma, you did it again. Great product.... Repeat customer for the new 25 cal Mrod with gauge port regulator.
40 shots at 40 FPE and 24 shots at 50 fpe with a spread hovering around 2% ES all on a stock air tube.

Frank W -

I got this in my .177 SynRod. I like how you can see the regulated air pressure. Easy to see when its time for refill. Works good, very stable FPS.

RayK -

I bought the Marauder version. The machining and fit are excellent. It is very easy to install into a otherwise stock Marauder with no drilling of air tube required. Instead, you remove one o-ring from the gauge block (on the side toward the muzzle) and the regulator seals against that side of the gauge block with a supplied o-ring. The regulation is excellent. It does take up some of the airtube space since it is located on the high pressure side of the gauge block. I used it on my 177 Marauder. It has plenty of plenum space so it would work for higher power tunes.

Robert R -

I received my reg and it works as advertised. Thank You.

Tim (Shorty) -

Never thought I would install a regulator but, gave it a shot. 22 cal synrod with modded valve at .25" throat, .168" porting to barrel and custom short stiff hammer spring (dual wire spring).
93 shots on regulation and an additional 20 to 30 shots off regulation at 25 fpe.
3000psi to 1100 psi.
Thank you Huma air. This is as good as it gets.....

No reviews found.

More reviews