Brocock Bantam Pressure Regulator
1 Reviews | Add review

Huma-Air External Regulator For tuning your Brocock Bantam Airrifle for maximum performance

€ 134,95
Price per pc.

Stock :

Quantity: 
Order

Huma-Air External Regulator For The Brocock Bantam

 
This External PCP Regulator build by Huma-Air is specialy designed for several air rifles with a pressure bottle with M18x1,5 treads like the Brocock Bantam
The tuning regulator will reduce the outgoing pressure of your rifle's pressure bottle according to your settings and this will result in a constant pelletspeed and better groups.
It is equipped with a pressure gauge that will indicate the fill pressure of the bottle and a foster male connection to fill the rifle. The position of the gauge and and foster can be chosen left or right and they can be aligned stepless into their position so it always looks good on your rifle.

When the regulator is fitted to the rifle you can read the regulator output pressure on your rifles's pressure gauge and the fill pressure will be shown on the regulator gauge.
Pressure can be set by turning the set-screw of the regulator. A 5 minutes turn contra clockwise equals to about 6-7 bar pressure increase.
(your original rifle's fill connection cannot be used anymore as it is replaced by the regulator foster male fill connection)

 

The benefits of this Huma-Air, Brocock Bantam tuning regulator are:

  • Higher accuracy of your Brocock Bantam due to the elimination of the pelletspeed fluctuations
  • The solid stainless steel foster fill connection and pressure gauge can switched over from left to right
  • The position of the foster and pressure gauge can be turned around for 360 degrees. So you aligned it to your own wishes.
  • Under the pressure gauge there is a o-ring what make it posible to line the dialplate up straight for the eye. 
  • It will give you a constant pellet speed over the full working pressure range.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage.
 

When you order your Huma-Air, Brocock Bantam tuning regulator you will receive:

  • Your regulator preset to your own wishes
  • A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
  • We will include a “Huma-Air regulated” breech sticker
  • Fitting instructions as pdf download
 

Huma-Air Quality Control  


Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.

 

Pressure settings of the Huma-Air bottle regulator
 

Your Brocock Bantam Botle regulator comes preset on the pressure we have tesed it and it is marked on the packing. You can set the regulator according to your wishes within the pressure range.
The output pressure will be shown on the factory pressure gauge of your airrifle.
The Huma-Air Brocock Bantam Bottle Regulator regulator comes in a wide pressure range of 60-170 bar output covering sub 12 ft/lbs and FAC models.
The Bantam has a limited amount of regulated air inside the action. We tested the Bantam to maximum of about 25 ft/lbs with 16 gn JSB in .22 for around 50 shots and 70 shots in 23 ft/lbs.


These regulators can only be used on the original rifle's pressure bottle. Do not exceed the factory adviced fill pressure or exchange the orginal factory botlle for a higher pressure version.
These regulators are not suitable for a CO2 to HPA conversion, because they no have a burst disk.

 

Shipping & payment


We ship worldwide with tracked priority shipping. We ship these pneumatic parts well packed for safe and undamaged arrival in the country of destination. As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.

You can pay safely and secure online by means of all major payment providers, like paypal, and credit cards companies.

 

Order by:

Add review

Review must be approved by an administrator before being posted.

Justice Rozniak - 28-04-2019 02:59

I put it on the bantam mk2. I’m in the process of adjusting the pressure everything works great they should update in the description of tuning it they call it a 5 minutes turn. knowing a degree range for adjustment would be nicer for people like me just getting into this hobby.