CZ200 regulator (internal)
CZ200 Pressure Regulator By Huma-Air
3 Reviews | Add review

Huma pressure regulator for the CZ200 airrifle.

Default delivery time

On stock

€ 79,00
Price per pc.


Fields marked with a * are mandatory
Add to Cart

Huma-Air Internal Tuning Regulator For The CZ 200


This regulator is specially made to fit the CZ200 model with quickfill
The Huma regulator will regulate the airpressure in your S200 airgun. It reduces the primary high fill pressure in the cylinder into a  lower pre-set working pressure. This will give you a constant pelletspeed and a higher accuracy.
The design volume is based on the 16 Joule version but it can been set higher if preffered.

The installation of the regulator is very simple. The regulator is placed inside the pressure tube of the rifle and you are ready.
It is vented to the atmosphere, without the need of a breath hole in the cylinder, so no creeping up in power during time,

The benefits:

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 

Pressure settings

The regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes. The pressure range is adjustable from 70-150 bar.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.

When you order one of our regulators you will receive:

  • Your regulator preset on to your own wishes;
  • A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
  • We will include a “Huma regulated” breech sticker;
  • Fitting instructions as pdf download


The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.



Before ordering a regulator:
Please make sure, you have made yourself familiar with the fitting instructions on our website, you are happy to carry out the necessary work and you are able to adjust your power to keep your rifle legal

Add review

Review must be approved by an administrator before being posted.

Ondra - 28-11-2018 18:43

I admire the much fine quality machining of the regulator. The installation is very quick and easy (Instructions are easy to understand). Unfortunately, I have not done a bullet consistency test yet, but I believe everything will be fine.

Costas - 02-04-2018 13:09

My second HUMA regulator.
Same review as the previous one. Easy to install, (this one replaced another aftermarket regulator).
Easy to adjust, the output pressure scale is accurate.
Works flawlessly on my CZ 200 for many thousand shots.
Well done HUMA. Only one suggestion again: The tape of the pressure scale tends to detach after some time. Please try another way for more permanent results.

Ants Välinurm - 08-10-2017 22:19

Olen väga rahul. Saan nüüd 10 lasku rohkem teha.