Daystate Tsar Tuning Regulator 5 5
Daystate Tsar Tuning Regulator
Daystate Tsar Tuning Regulator
Reviews | Add review

Huma pressure regulator for tuning your Daystate Tsar airrifle to the maximum performance and best concistancy.

Default delivery time

On stock

€ 114,95
Price per pc.


Fields marked with a * are mandatory
Add to Cart

Daystate Tsar Tuning Regulator

For the Daystate Tsar we have a tuning regulator available what will improve your airrifle's performance.
This regulator is vented to the atmosphere and is an one on one replacement for your factory regulator.
Due to our ultra compact build the regulator will give you more regulated volume available so you can get the same pellet velocity with less pressure.


The benefits of the Huma regulator for your Daystate Tsar:

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a full flat shotstring immediately.
  • Replacing the factory regulator for the Huma Daystate Tsar regulator will give you the most reliable performance


When you order your Daystate Tsar Tuning Regulator you will receive:

  • Your complete regulator preset on to your own wishes.
  • A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
  • We will include a “Huma Regulated” breech sticker.
  • Fitting instructions as pdf download.


Pressure settings of the Daystate Tsar Regulator

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Our advice for choosing the best pressure range for your Huma regulator:

  • Low pressure range:        60-110 bar for 16 Joule / 12 ft/lbs models.

  • High pressure range:       100-170 bar for all FAC models


Huma-Air Quality Control

Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Add review

Thank you very much for taking the effort to review our product.

This review will not be displayed immediately, since it first needs to be approved by a moderator. Once the review has been approved, it will be displayed on this page.

All the best

Team Huma-Air

Terry Judd -

Great product, easy to fit, easy to adjust, adjusted my unit down so it was shooting at 779 approximately, then adjusted to 785 on hammer spring.
Consistently running @ only 3 ft/ps variation, who can’t be happy with that.

Dave Schofield -

This is a good regulator, i cant fault it, and is easy to install, with AA field pellets, gave an overall spread of just 7fps from a 200 bar fill, down to 100 bar cylinder pressure. for the Tsar, it's reg pressure needs to be set low around 80 bar, every rifle is different so pressure may need to be adjusted to find what's right for you.

Barry Warren -

Excellent product received at my address within a few days of ordering. Consistency in my Tsar is now within 5fps!

Peter Bocking. -

Quick delivery, regulator certainly easy to fit, luckily the Tsar came apart OK.
Pleased Ive fitted the Huma as its certainly better than the original reg.
Get one it may solve a lot of your problems.

Philip Johansen -

Surprisingly easy to fit. Excellently manufactured. Only had chance to check a string of shots over chrono. Very consistent at 783 FPS with 8.44 grain pellets. Had mine set at 95 bar by factory. Would advise any one getting one to have it set at 90 bar. The true test will be consistency in temperature. First impressions are I AM VERY HAPPY.

No reviews found.

More reviews