Digital Mini Pressure Gauge 25 mm. Black G1/8 BSP Threads 300 Bar O-Led Screen
Digital mini pressure gauge 25 mm with G1/8BSP threads. Black body. Oled display and USB charge cable. Great upgrade for many airriflesMax working pressure 300 bar.
Digital mini pressure gauge, 25 mm diameter G1/8BSP Threads, 300 Bar working pressure with black body
This digital Pressure gauge 25 mm with black body has 1/8 BSP thread and has been designed to accurately read and display the pressure.
The air pressure can be displayed from 15 to 300 bar, with a maximum deviation percentage of 0.25%.
The gauge has a clear OLED display and shows the pressure in Bar.
At the front you will also find the on/off button. After switching the gauge on, it will automatically turn off after 60 seconds.
An USB charging cable is also included, Before first use please charge the gauge for at least 12 hours.
The gauge comes with several orings so it can be aligned. Due to the different size of o-rings there is enough movement to line up the gauge perfectly in eye position.
Check out the general fitting instructions for pressure gauges on our website
Great value for money!
Diameter 25 mm.
Body height 17,8 mm.
Never exceet the factory adviced fill pressure of your rifle.
Specifications
Brand |
---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
Manu (verified owner) –
Finally a truly accurate pressure gauge !
Ralph Lövenich (verified owner) –
Bought 2 of them for my FX Dreamline. Very good product. The older FX gauges are realy far off the actual pressure. When filling with my Hill Compressor thebottle gauge was nearly 30bar of the real pressure. The new ones are spot on. It’s realy great that you can easily charge them and need no batteries. Love them. Also the guys at Huma Air. Realy helpfull and nice guys. Thank you Marc!
Robby Bennett (verified owner) –
I bought this gauge recently to install on my BRK Ghost HP .22 cal. I chose this smaller gauge over the one they list specifically for the Ghost mainly because this gauge is smaller. Installation went well although I was afraid that it wasn’t going to work as soon as I looked into the gauge port hole after removing the factory gauge. Rather than having a hole at the bottom of the port for the air pressure to charge the gauge, the hole actually comes through the sidewall just below the thread inside the port. The factory gauge was sealed with a Dowty sealing washer which I was forced to reuse. As I began to tighten it down, I wanted the gauge to sit level, yet once hand tight the bottom of the gauge was maybe @ the 8 o’clock position. I back it out, loosened it, to where the bottom of the gauge was at 6 o’clock and level. I was afraid that it would leak being that loose, however I’ve had no leaking issues since installation. If I could find a niggly point about the gauge, it doesn’t respond as fast as a bourdon tube type analog gauge. So after each shot it may take a minute for the gauge to creep up to the reg setting. At least I assume it’s the gauge rather than the regulator being slow because I bought the larger version gauge and installed it on a FX Wildcat BT and it’s slow to respond too. For my needs, this gauge is perfect. I gives me a much more precise idea where my Reg pressure is set out to the tenths place. Whereas before my old eyes were having a really hard time even knowing if the reg was on 110 or 120 bar. Get you one too if you want a REAL number shown for your Regulator or your bottle even..
Mateusz (verified owner) –
Very Accurate gauge, great for FX impact