Edgun Matador R3M Power Tune Set and Regulator 5 3
Edgun Matador Regulated  Power Tune Set
Edgun Matador R3M Power Tune Set and Regulator
Reviews | Add review

Complete Huma Power tune set with regulator, XXL plenum and hammerweigh for tuning the Edgun Matador R3/R3M airrifle to the maximum performance.

Default delivery time

On stock

€ 99,95
Price per pc.

 

Quantity: 
Add to Cart

Edgun Matador R3 and R3M power tune set


For the Edgun Matador R3 and R3M we have designed power tune upgrade with XXL volume plenum, Huma tuning regulator and a special designed massive bronze hammer upgrade.
This set allows you to gain maximum power out of your Matador.

This tuning set replaces the complete original regulator and regulator body and is an “one on one” replacement.
You can unscrew the original regulator house from the Edgun valve house and replace it with the complete power plenum with regulator.
(This model will fit until early 2017 models. You can check if your reg diameter is equal to the regulator plenum)
The hammerkit can be fitted to the original rifle's hammer.
Due to the small build of the Matador valve stem we strongly advice you not to exceed 140 bar maximum output pressure.

If you are not looking for extra power, but only for a replacement regulator, you can choose not to install the extra hammer weight.
The extended regulator plenum makes it possible to achieve the same pellet velocity with less regulator output pressure

Watch the fitting video made by Wingman NZ
 

The benefits of the Edgun Matador R3 or R3M regulator are:

- Easy adjustable regulator due to the pressure scale, so you can do all the fine tuning yourself
- This regulator has a wide pressure range to cover all calibers
- A XXL power volume plenum what will provide you the right cappacity of regulated air volume
- The ultra compact build of the regulator will give you even more regulated volume
- Excellent consistency
- Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations

These regulators are vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.
We will put in a breech sticker “Huma regulated” what you can put on your rifle.
 

Huma-Air Quality Control

Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Add review

Thank you very much for taking the effort to review our product.

This review will not be displayed immediately, since it first needs to be approved by a moderator. Once the review has been approved, it will be displayed on this page.

All the best

Team Huma-Air

TxemaD -

Great product, nice job!!
It works perfectly, with a great consistency ( 2m/s)
Thanks

George -

Great product...excellent quality,fast shipping,great shot consistency..highly recommended...!!

Angelo -

really great !!! as always!! all perfect shipping and object, with huma you're never wrong !!!! COMPLIMENTS!!!

No reviews found.

More reviews