Evanix Blizzard S10 Tuning Regulator 5 5
Evanix Blizzard S10 pressure regulator
Evanix Blizzard S10 Tuning Regulator
Reviews | Add review

Huma-Air Tuning Regulator for the Evanix Blizzard airrifle.

Default delivery time

On stock

€ 94,99
Price per pc.

 

Fields marked with a * are mandatory
Quantity: 
Add to Cart

For the Evanix Blizzard S10 airgun we have a tuning regulator that can be pushed into the pressure tube.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time
After fitting the regulator your rifle's pressure gauge will indicate the regulated pressure.
This model regulator is only suitable for rifle's with pressure tube, not suitable for bottled rifles. Also Please check if your valvehouse matches the picture on the Tab "attachment" as there are other types of valves used by Evanix too.

 

The benefits:


Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 



Pressure settings


The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

 

When you order your Huma-Air Tuning regulator for the Evanix Blizzard you will receive:
 

  • Your regulator preset on to your own wishes;
  • A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
  • We will include a “Huma-Air regulated” breech sticker;
  • Fitting instructions as pdf download

 

Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
 

Add review

Thank you very much for taking the effort to review our product.

This review will not be displayed immediately, since it first needs to be approved by a moderator. Once the review has been approved, it will be displayed on this page.

All the best

Team Huma-Air

Hadj -

I bought three regulators for my 2 Evanix Blizard S10 and the rainstorm, both are working as expected and giving consistent pressure for all the shots.
I would highly recommend the regulators from Huma air. they are making a good quality regulators and their customer service is outstanding. if you dont hear back from them is because they did not get your email. try again and be sure they will get back to you.

Rex -

To add to my previous review, excellent service and communication from company, very helpful. Blizzard is very accurate on its own, After 60+ shots gauge still shows same regulated pressure of approx 130 bar. Thanks Huma, "does what it says on the tin".

Rex -

Easy fit to my 177 Blizzard S10, Have yet to try it, got rid of most of air after club shoot today (did'nt want to waste it ) bled it off at grub screw, then made mistake of over dry firing it to make sure it was empty, wouldn't fill, air coming out of barrel, took home and stripped it, found valve was stuck open in the forward position due to no resistance from empty tube, fixed that fills nicely and show factory setting on manometer of approx 130 bar. Said all this to save anyone else making same mistake. All the best.

Bryan -

I set the regulator to 120 bars, perfect and easy to install.
Now i can group my pellets under 5cm diameter at a 75meters distance!
Thank you

Mario Spiteri -

I have installed the HUMA regulator in my Blizzard .22. The accuracy obtained is unbelievable. At 40 metres I achieve one shot groups when firing 15 shots in sequence.The pressure setting is at 120BAR.

I would like to experiment with semi-auto rifles like the Max and Speed where the air reservoir is of the same dimensions as that of the Blizzard.

Well done to HU-MA.

Mario

No reviews found.

More reviews