FX Bobcat MKII Tuning Pressure Regulator By Huma-Air
Huma-Air tuning regulator for the FX Bobcat airrifle
Huma-Air Tuning Pressure Regulator For The FX Bobcat MKII
This Huma-Air tuning regulator is specially designed as a “one on one” replacement regulator for the FX Bobcat MKII airrifle.
It can be placed into the action within a minute without any modification.
The regulator is very consistent over the total range and solves all the known issues of the original regulator.
Made of high grade aircraft aluminium in combination with bronze components
The benefits of the Huma-Air, FX Bobcat tuning pressure regulator are:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- Less fluctuation in the shotstring
When you order your Huma-Air Tuning Pressure Regulator For The FX Bobcat you will receive:
- Your regulator preset to your own wishes
- A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
- We will include a “Huma-Air regulated” breech sticker
- Fitting instructions as pdf download
Huma-Air Quality Control
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulatiors. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and vavle discs.
Pressure settings of the Huma-Air Tuning Pressure Regulator For The FX Bobcat
The Huma-Air, FX Bobcat tuning regulator comes in the wide pressure range of 60-175 bar output, (scale label visible 70-170 bar) covering sub 12 ft/lbs and high power FAC models.
They come preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so it’s very easy re-adjust or fine tune the pressure setting suitable to your wishes.
(Fx Boss .30 with150 bar regulator output will give about 270 m/s speed with 44,75 gn pellets what is 78 ft/lbs – 105 J of power.)
Specifications
Brand |
---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
Downloads
Download installation-guide-fx-boss |
john kopchik (verified owner) –
The Huma reg for the Bobcat MK 1 fit the gun perfectly. The quality of their regs is first class. Adjustment is much easier than the stock FX reg and being shorted usually will give more plenum space. I have several and none of them ‘creep’. Whereas all my FX regs creep to some extent.
Jerry (verified owner) –
Far superior to the replacement FX regulator that FX USA installed on the Bobcat MKII. The old one failed and the new one would not hold anything in the way of consistent pressure. Additionally I could not adjust the hammerspring past a “certain point”. Calling the FX USA tech who worked on the gun (he did a super job on it completely resealing it) but he said it was the most sensitive hammer adjustment he’d ever seen. He had down graded to the 130 bar reg from the 140 that was in it saying that would be better. That was my only complaint.
But when I could not control the reg and they had NO INSTRUCTIONS on how to do it (ancient tech) I ordered the HUMA. It got here in 3 days including ordering day.
I had asked it to be set @ 110 bar as a start point which proved stupid on my part. I reset it to 140 after asking HUMA exactly what I should do. Yes no instructions there either but barely needed. That was not accurate as the paper scale really should be considered approximate.
I managed on the 3rd try to set 142 bar and it has stayed hammered in place 🙂 What a difference. I now also had full hammerspring adjustments and in any other FX. I have been able to set my speeds exactly where I want them after the break-in period of a can of pellets.
My other complaints, and it is with all their replacement regulators that I have so far installed (4), is the body is made of soft aluminum. Be very gentile. On my Maverick I also buggered a bit the straight screw driver slot on the reg (yeah for no reason I understand they use a straight blade screw driver for final external adjustments???) while I was looking at the gauge on the other side of the gun. An allen key would have been way better in my opinion.
Would I buy this again, ABSOLUTELY!
Nothing is perfect out there but they would hard to get it right.
Stephen Cooper (verified owner) –
Now shooting 25cal, 34 grains JSB pellets at 830 fps with reg set at 135 bars. That is 10 bars lower than FX reg at the same speed.Also gained 15 more shot per fill above FX reg. Very pleased with the result. Huma-Air reg is smaller than FX reg resulting in more volume in plenum.
Mike B. (Centercut on AGN) (verified owner) –
Original reg. started to creep pretty bad, and decided to replace with the Huma. I found for the .30 caliber gun, that 155 bar and 875 FPS with 44.75 grain pellets resulted in superb accuracy and very good efficiency. I won EBR 2019 with a Huma in my .30 FX Bobcat Mk2. Thanks Huma~!!!
Tony K. (verified owner) –
Very pleased with this regulator so far.
My Bobcat .30 would fluctuate 5-10 bar at times
I thought it might be the gauge
But now it comes back to 150 consistently
Fairly easy install and the shipping to E.Coast U.S.
was amazingly fast.
florijn (verified owner) –
Top notch regulator!
Easy to build in, in to my FX Bobcat.
After testing, I instandly got better shot consistency.
The regulator set at 150 bar, gave me a velocity of 256 to 257 m/s with JSB .30 in 50,15 grain.
With a unbelievable small deviation spread.
Hole in hole at 50m.
In all, worth the money and a big improvement on the standart FX regulator.
Yves (verified owner) –
Zeer goede regulator !!