FX Crown High Flow Pin Probe
Huma-Air High Flow Pellet Pin Probe for your FX Crown, to gain maximum airflow behind your projectile, great when you are shooting with slugs.
FX Crown High Flow Pin Probe.
Specially for the FX Crown we made a High Flow Pin Probe so you can get the maximum performance out of your FX Crown, specially when you are using slugs.
We made a small tollerance modification for this current batch, so it fits all models Crown perfectly.
In combination with our Dual Hole, V2 High Flow Transfer Port you will gain the ultimate performance out of your FX Crown
These sets are specially developed for slugs and can be used in combination with our Power Tuning Hammerspring
Please note:
Any modification done to the airflow of your rifle, will affect the entire setup and performance, you might need to re-adjust the settings of your rifle again to get the best possible performance.
Available in  .22, .25 and .30
Specifications
| Brand |
|---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
12 reviews for FX Crown High Flow Pin Probe
Related products
-
Add to cartAirgun Lube Silicone Grease
€6,96(incl. 21% VAT)In stock
-
Select optionsHigh Flow V2 Dual Hole Transfer Port For FX Impact, Dreamline, Crown, Maverick and Wildcat MKIII
From: €29,95(incl. 21% VAT)In stock
-
Add to cartComplete o-ring replacement kit for FX Crown
€9,95(incl. 21% VAT)In stock
-
Add to cartFX Crown Tuning Hammer Spring
€7,95(incl. 21% VAT)In stock
Alternative products
-
Select optionsFX Impact and Crown Tuning Regulator Gen 3 By Huma-Air
€99,00(incl. 21% VAT)In stock
-
Select optionsFX Crown Barrel Kit Superlight Smooth Twist X Superior
From: €275,01(incl. 21% VAT)In stock
-
Select optionsFX Crown Caliber Exchange Set with V2 Dual Hole Transfer Port and High Flow Pin Probe
€88,74(incl. 21% VAT)In stock
Stelios (verified owner) –
Delivery time was excellent. Of the basic first stage upgrades, this is the one to go for. Maximises the abilities of the Crown in .22, especially when paired with the upgraded hammer spring and dual transfer port. Very well made.
Tomas (verified owner) –
It worked 20-25 fps faster speed
Stuart Mail (verified owner) –
Not a huge increase in fps over std FX .25 probe, but much smother feed action for both pellets and slugs
sidney milner (verified owner) –
well made product,a must have if you have a crown,fast service to the uk,highly recommend
Des Mulholland (verified owner) –
Seems very well made looking forward to using it Huma Air very good company to deal good range of Fx products all items despached promptly and well packed would buy Huma Air again
DCR 540 (verified owner) –
Now the circle is complete” long ago I bought the High Flow V2 Transfer port for my Crown gen 1 and installed it and got no real benefit from that part. It was said then that what was needed was the Pin Probe to match but no Pin Probe for the Crown was created yet” everything for the Impact nothing much for the Crown. Now with this addition the system High Flow V2 and High Flow Pin Probe work together to add real power! I have the Generation 1 Crown, no Amp Regulator, and no Power Plenum so it’s been hard to get heavier slugs up to speed to get real benefit from them. I’ve seen better efficiency with pellets too I can shoot them with less hammer spring tension, and with the transfer port on low or medium, a higher shot count and lower muzzle report! It’s an easy install but you need both parts to work together…
Milco Huisman-Harenberg (verified owner) –
goede aankoop, in combinatie met 700 mm loop, en nieuwe Huma inlaat , erg veel gewonnen op mn Crown .. ik kan dit nu vertalen naar veel, erg veel meer vermogen of terug draaien naar hetzelfde vermogen maar veel meer schoten op 1 vulling (WAS reeds meer als 120 op 1 vulling) .. grote klasse Huma LEVERING WAS SNEL EN MET EEN PRIMA PRIJS
Costas (verified owner) –
Works fine in my MK2 600mm Crown and gained about 20-25 fps with 25gr HN slugs without changing any other setting. Recommended.
Don (verified owner) –
Great product would defiantly recommend . it really is a must have part
Familie (verified owner) –
Bedankt voor de bereidwillige aanpassing van .22 pin probe naar .177 .
Alles werkt zoals voorzien.
Ook de rest van de besteling prima.
Zoals altijd.
Bedankt Marc & Huub.
Tom (verified owner) –
Great product and service!
Jimmy Dozier sr (verified owner) –
By far the best thing I’ve added to my crown. This probe is fantastic.