FX Impact M3 First Stage Tuning Regulator by Huma-Air
Huma-Air external first stage replacement tuning regulator for FX Impact M3. For finetuning your FX impact to the ultimate accuracy.
FX Impact M3 First Stage Tuning Regulator by Huma-Air
This first stage tuning regulator for your FX Impact M3 build by Huma-Air is specially designed to replace the factory FX first stage regulator.
As a part of the Dual Stage regulator system of the FX Impact M3 the first regulator pre-reduces the pressure in preparation for the second regulator. This provides less stress on the second regulator and achieves a more constant output pressure with less standard deviations. Advised is to use about 30-40 BAR difference between the 1st & 2nd regulator.
This regulator is a one-one one swap with the factory regulator and also allows you to unscrew or swap the pressure bottle of the rifles without de-presurizing the rifle.
Pressure can be set by turning the set-screw of the regulator what can be found inside the regulator. Half a turn counter clockwise equals to about 25-30 bar pressure increase. The set pressure can be read on the rifle’s pressure gauge.
The Huma-Air tuning regulator will ad 23 mm in length compared to the factory regulator.
The benefits of this Huma-Air tuning regulator for your FX Impact M3
- Higher accuracy due to the elimination of the pelletspeed fluctuations.
- Quick refill after every shot.
- Reduces the stress on the second stage regulator
- Fitting instructions available as pdf download
Pressure settings of the Huma-Air Dual Stage Use Bottle Regulator For The FX Impact
Your FX Impact M3 first stage regulator comes preset on the pressure we have tesed it and it is marked on the packing. You can set the regulator according to your wishes within the pressure range.
The output pressure will be shown on the factory pressure gauge of your airrifle.
The Huma-Air FX Impact M3 first stage regulator comes in a wide pressure range of 70-220 bar output covering sub 12 ft/lbs and FAC models.
Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze and steel.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Specifications
| Brand |
|---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
Download 2043-fx-impact-m3-first-stage-replacement-regulator 17 reviews for FX Impact M3 First Stage Tuning Regulator by Huma-Air
Related products
-
Add to cartRebuild kit for your regulator
€6,95(incl. 21% VAT)In stock
-
Add to cartComplete o-ring replacement kit for FX Impact M3
€12,95(incl. 21% VAT)In stock
-
Add to cartAirgun Lube Silicone Grease
€6,96(incl. 21% VAT)In stock
-
Add to cartHuma-Air Thick Silicone Grease 20 ml.
€4,49(incl. 21% VAT)In stock
Alternative products
-
Select optionsFX Impact M3 Black Airrifle
From: €1.944,99(incl. 21% VAT)In stock
-
Select optionsFX Impact and Crown Tuning Regulator Gen 3 By Huma-Air
€99,00(incl. 21% VAT)In stock
-
Select optionsFX Impact Caliber Exchange Set with V2 Dual Hole Transfer Port and High Flow Pin- or Pellet Probe
From: €89,95(incl. 21% VAT)In stock
-
Select optionsFX Impact Barrel Kit Smooth Twist X Superior
(incl. 21% VAT)From: €315,00From: €267,41In stock
Ian (verified owner) –
Great regulator solid build. No reg creep refresh rate is faster than stock regulator.
GRM (verified owner) –
Ordered a FX Impact M3 first regulator, plus 6 other items from Huma-Air. All items arrived very quickly to me in Australia and are top quality.
Have not yet fitted the regulator, but I have no doubt it will operate as stated.
Huma-Air is a very reliable and good company to purchase items from. I have no hesitation in recommending Huma-Air and have ordered parts on 3 separate occasions over the past 3-4 years.
Tuomo (verified owner) –
Fills the second regulator much faster. Very accurate. Makes m3 more comfortable to use. I am really happy with this.
Steve FX (verified owner) –
Helped with accuracy and shot count , very happy
Steven Hirst (verified owner) –
Very steady unit cannot fault the huma first regulator
Neil nguyen (verified owner) –
This product is superb. It is solid, well built, and reliable. It does not have any creep issues and it regulates very consistent shots. Fx airguns should use all huma air products and incorporate it into theirs.
Huma air is an excellent after market company. I will make many more future purchases of their products.
Glenn McConnell (verified owner) –
I have a FX impact M3 after reading reviews I ordered both first and second stage regulator’s they work flawless and very easy to install. The recovery time is so fast it’s hardly detectable on the gauges.
Another thing to note is the service of the employees is outstanding, you cannot find any better service anywhere and I want to thank them for that.
I ordered my parts on a Friday and receive them on Tuesday. I couldn’t believe it when they drop them off that day I live in the United States, unbelievable how fast I receive them.
Thank you team Huma-air
frédéric MESCHAIN (verified owner) –
La pièce la plus facile à monter ce que j ai pu monter sur ma fxIM3. Seul bémol, devoir démonter à chaque réglage pour avoir la bonne pression de sortie. En fait, il faut connaître la pression dans le plénum à l avance de telle sorte à resté dans des différences pas trop élevées. Je pars de 150 bars dans le plénum, donc un max de 200 bars en 2 eme chambre. Perso 170 bars pour 250 dans la bouteille. Sinon top !!!! Belle pièce et facile à monter
Stan (verified owner) –
High quality product!
Very happy with performance of the regulator
David Harper (verified owner) –
Had my M3 since 2021 one of the first generation and the first reg has always been sketchy, second reg would take too long to recover and would see significant creep over short periods.
Huma first reg does what they say and it’s engineered finish is pleasing and in keeping with the appearance of the rifle.
Haven’t taken it apart but guessing that it has larger diameter belleville washers that are much better able to cope with the pressure and both regs now recover super quick and precisely back to where they were set, with no creep whatsoever.
In two years I have invested a lot in upgrades for the M3 but for me this is the most important one without any doubt.
Thank you Huma, very pleased 🙂
Matt McDonald (verified owner) –
Haven’t tested yet but expect it will be as reviewed by so many others.
If the service I received when purchasing both the first and second stage regulators is anything to go by, it will be an exceptional product.
Very happy with the delivery time and service.
Koen (verified owner) –
Werkt schitterend, blijft op constante druk, reactie tijd veel sneller dan originele fx en vooral: geen lekken !
StuartL (verified owner) –
This the one I was waiting For!!!
A Perfect compliment to the 3rd Gen 2nd Regulator!!
Just as Rock solid with no creep…
A definite needed upgrade to the Impact M3
Huma-Air Turn around is Fast … even when shipping Internationally (USA)
Jose Sugranes (verified owner) –
Great regulator, very accurate and definitely better than the original fx. Thanks huma air for, like always, very fast shipping and delivery. A+.
Eric (verified owner) –
OMG What a massive improvement over stock reg
No more creep and the recovery speed ***** Rapid
Easy to install and adjust
IMO If you have an M3 you need this
lizhen! (verified owner) –
Load the goods as soon as possible and wait for them
Tony (verified owner) –
First class product. Works fast, but what anything can you wait for Huma products 🙂 Way better than original reg.