FX Impact M3 Second Stage Tuning Regulator Gen 3 By Huma-Air
Huma-Air tuning regulator Gen3 for the FX impact M3 airrifle as replacement for the factory second stage regulator.
This FX Impact M3 Tuning Regulator by Huma-Air is specially designed as a “one on one” replacement regulator for your FX Impact M3 second stage regulator
Unfortunately the fixed limited space in the FX Impact M3 action was not sufficient for our standard Huma-Air Regulator design, so we had to comply our design to the ratio’s used by FX.
Nevertheless we have accomplished to make a great replacement regulator which will solve the known issues of the factory made regulator.
So what can you expect of the Huma-Air FX Impact M3 Second Stage Tuning Regulator:
Three special pressure ranges are available so you can tune the rifle exactly according to your own wishes
This Huma-Air FX impact regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
We also supply some extra valve disks, so in case you adjust the pressure to the wrong side, and you damage the valve, it can be replaced without any extra costs.
Pressure settings
The design of the regulator makes it posible for setting it exactly to your wishes while placed in you FX impact M3 by watching the output pressure gauge on you rifle.
We have currently two pressure ranges for the FX Impact Gen3 regulator available:
- The extra high pressure range, 135-200 Bar what will suit all calibers within the high power range and for more extreme purposes and very good for the slugs and heavy pellets.
- A low pressure range, 60-135 Bar, what will suit the lower power rifles like the sub 12 ft/lbs versions perfectly.
Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during shipping.
When you order your FX Impact M3 Second Stage regulator you will receive:
- The Gen III tuning regulator by Huma-Air
- The belleville spring set of your choise
- A set of spare valve disk
- We will include a “Huma-Air regulated” breech sticker
- Fitting instructions as pdf download
Specifications
Brand |
---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
Josh –
Would like to see the reg body made out of brass instead of aluminium. But apart from that it’s a very good product. Operates better than the factory regulator.
Allan Xavier (verified owner) –
Excellent product
John (verified owner) –
Gen 3 reg for 2nd reg for the Impacts works fine. Less creep than the factory amp regs with the plastic piston. The instructions are very clear and easy to follow. Note: instruction #4 is not necessary. When the gun is degassed, there isn’t any pressure anywhere in the gun. Overall, one can’t go wrong with the Huma regs. I have them on several guns for years with no problems.
Steve FX (verified owner) –
Made a vast difference over the fx one shots more consistent
Greg (verified owner) –
I have 2 FX air rifles, a Crown Synthetic Gen 2. In 22 cal and an Impact Gen 3 Sniper Bronze in 25 cal. I fitted a Huma reg in my Crowne several years ago after creep problems with the AMP factory reg and it shoots like a laser beam ever since. I thought when I purchased the Gen 3 Impact more recently that FX would have fixed the creep issues but no, they still use the same dodgy reg that does not hold consistant pressure. Now these rifles are high end quality so why do we have to put Huma regs in them to make them shoot properly. The Impact had the same problems as the Crown, POA shift every time I took it out to use it. I fitted the Huma reg in the Impact and it now it is also a laser beam. Its frustrating that FX owners need to do this.
Huma regs just work, consistant pressures and POA in the same spot every time you get it out of the safe. When you buy an FX just order a Huma reg the same day. They are simple to fit and settle in quickly, just follow the instructions and you cant go wrong. Definately worth the spend.
Bibat (verified owner) –
A very good product
frédéric MESCHAIN (verified owner) –
Hello tout le monde. Cette piece n est pas facile à monter. Dès que l comprend que les toutes les coupelles ne doivent pas être mises. Au final, ça va. Le tuto huma air sur Uribe est super mm pour quelqu un comme pour qui l anglais recèle encore bien des secrets. Une fois montée, réglage 150 bars. 100 m je perce deux plaques de Boon marin avec du slugs jsb légé. Je n en suis qu au début mais c est prometteur : ⭐️⭐️⭐️⭐️⭐️
StuartL (verified owner) –
This the Best Upgrade for the Impact M3!!
ONe of the most Rock Soliid Regulator for a PCP!
Very Consistent, with No Creep!!
A+++ machining and design!!!
Eric (verified owner) –
With this and the Huma FX Impact M3 First Stage Tuning Regulator it’s totally changed my imp3 for the better
But what narks me is why Fx didn’t install Huma regs in the first place !!!
If you’re thinking about getting these regs do yourself a favor & Just buy them
Paul (verified owner) –
Don’t think about it just do it 100% better reg then the oem. I have 3 rifles all with huma regs and have never let me down. If you’re fed up with creep and inconsistency in your impact then just buy a huma reg now.
petedotnl (verified owner) –
after some tuning sessions i was not amused by the fx regulator. lots of creep and inconsistent during sessions.
I ordered this regulator from Huma and replaced the FX one. it needed some time to settle in (about a week) but from the start it was already more consistent then the FX. the creep from the FX was 3 bar in one hour to 12 bar in 24 hours. the Huma levels out in a few minutes (you always have some creep / leveling in the first minutes) and then holds it’s pressure for days.
too bad that a brand like FX does not deliver the quality at the price point they follow. They better install a Huma from scratch in all of there products.
Sam (verified owner) –
Well made and very consistent so far no creep
Salahuddin (verified owner) –
It’s working very well, much better than Original reg. in my FX impact M3, maintain it’s performance over time by keeping the regulated pressure exactly the same over time with same refill time and very good regulating , fixing the FX reg. Issues and performing better.
Branden g (verified owner) –
Works perfectly, shipped to the usa in 4 days WOW..
Sverker (verified owner) –
Worked perfect as always.
Chris k (verified owner) –
Easy to set up the washers on the piston & install works great and the usual Huma Air quality
Rick (verified owner) –
I installed the extreme pressure version of the Huma regulator in my FX Impact M3 .357. The reg is great and has far better accuracy and adjustability than the factory reg. The only thing I wish was designed different was the adjustment screw. I wish it was a square or allen style. For pure function, buy with confidence.