FX Wildcat MKIII and Maverick Pin Probe
Huma-Air High Flow Pellet Pin Probe for your FX Wildcat MKIII or FX Maverick, to gain maximum airflow behind your projectile specially for slugs.
FX Wildcat MKIII and FX Maverick High Flow Pin Probe.
Specially for the FX Wildcat MKIII and FX Maverick we made a High Flow Pin Probe so you can get the maximum performance when you are using slugs.
In combination with our Dual Hole, V2 High Flow Transfer Port you will gain the ultimate performance out of your FX Wildcat MKIII or FX Maverick
These sets are specially developed for slugs and can be used in combination with our Power Tuning Hammerspring
Please note:
The Huma-Air high Flow pellet probes are designed to perfectly align with the hole of the transfer port for an optimal air passage without any obstructions in the flow to get the maximum efficiency.
To achieve this performance the probe is designed fractional longer compared to the factory probe and it might be needed to retract the cocking lever to the end to release the magazine.
Any modification done to the airflow of your rifle, will affect the entire setup and performance, you might need to re-adjust the settings of your rifle again to get the best possible performance.
Available in .177Â .22, .25 and .30
Specifications
Brand |
---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
@arcticairgunner (verified owner) –
One star removed because there was no documentation. Otherwise, excellent pin-probe!
Be aware there are no shims with this probe, and none are required! Just buy the one for the caliber of your air rifle, and it’s a drop-in replacement.
Kostadin-Bulgaria (verified owner) –
Very good workmanship.
I strongly recommend.
Makis (verified owner) –
Good product,
It’s the right one for slugs
G.P (verified owner) –
Better air flow, better position of the pellet or the slug in the barrel because
the probe is a little bit bigger than the original and it pushes the projectile deeper.