Jkhan pressure regulator
Jkhan Noblesse Tuning Regulator By Huma-Air
7 Reviews | Add review

Huma pressure regulator for the Jkhan Noblesse airrifle.

Default delivery time

On stock

€ 94,99
Price per pc.

Stock :

Fields marked with a * are mandatory

Huma-Air Tuning Regulator For The Jkhan Noblesse


For the Jkhan Noblesse airguns we have a designed a regulator that can be pushed into the pressure tube.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time. After fitting the regulator your rifle's pressure gauge will indicate the regulated pressure.

This model regulator is only suitable for rifle's with pressure tube, not suitable for bottled rifles.


The benefits of the Huma-Air, Jkhan Noblesse tuning regulator are: 

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage 


When you order your Huma-Air, Jkhan Noblesse tuning regulator you will receive:  

  • Your regulator preset to your own wishes
  • A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
  • We will include a “Huma -Air regulated” breech sticker
  • Fitting instructions as pdf download



Huma-Air Quality Control  

Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulatiors. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings valve discs.


Pressure settings of the Huma-Air, Jkhan Noblesse tuning regulator

The Huma-Air, Jkhan Noblesse tuning regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.



Shipping & payment

We ship worldwide with tracked priority shipping. We ship these pneumatic parts well packed for safe and undamaged arrival in the country of destination. As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.

You can pay safely and secure online by means of all major payment providers, like paypal, and credit cards companies.


Order by:

Add review

Review must be approved by an administrator before being posted.

pw_garfield - 25-09-2019 16:36

The huma regulator was a very straightforward installation on my 25 cal Bullpup Noblesse.
I did not change anything from factory settings. The Regulated Pressure chamber Guage reads approx. 150 bar.
Very pleased, consistent strings, of 868fps +-3fps over 30 rounds with JSB 25.39.(approx. 58 joules)
Velocity will start to drop off in the next 10 rounds (from round 35-40)

javier. - 17-01-2019 21:05

hello good day I have jkhan 6.35 of series the chrono gave 50 juls. I opened air pass to him in valve to 8 .5 mm recess valve needle to 3mm then I put a bit from cannon down 7.5 mm. change the barrel by one LW without choke of 600mm air inlet in 5.5mm cannon and housing of 2 toricas to seal cannon. I put regulator huma at 160 bars and low camera magnified to 100mm and the bullet noe hp 6.35 of 3.18 grams cb 0.12 come out at 265m / s 112 juls cb 0.12 at 50 m stick goal to 100 juls load deposit at 250bares and huma regulator go all to 265 m / s good regulator .ctc 2moa at 100m. group well to hunt boar or deer with holistic sight at 30m and 50m hitting with 100 juls

Jurijs - 22-08-2018 20:00

Installed much simpler then expected. Used 2.method from instruction. No leaks. In Noblesse bullpup the manometer placed after regulator. And some days I saw the pressure I was regulated the regulator.

Abdulkarim - 25-04-2018 09:21

Great products and service as usual. I installed it in my jkhan .22 . set it to 130 bar and was awarded with 50+ consistant shots with speed of 890fps for 21.14 gr. fully satisfied with the performance and accuracy.

Dewald - 09-12-2017 16:51

Great regulator. A lot more stable than previous other brand regulator I had. Shot velocity between 0.5 and 5 ft/s. My previous regulator I had was beteen 10 and up to 30 ft/s between shots.

Carlos Domingues - 16-12-2016 22:30

I recently purchased a Huma regulator for my also recent acquisition, a Jkhan Noblesse B in .22.
After the last few years have tried the most different brands of regulators, I decided to Huma face the latest innovations, such as incorporating a scale for a more efficient regulation of the desired pressures.
Recently installed, it is meeting above expectations, making pressure modification to achieve the desired projectile speeds now viewed as easy tasks.

Ken Matthews - 30-07-2016 13:56

I fitted the Huma regulator to my Jkhan Noblesse and got a perfect flat shotstring. Very happy with it. Easy to assemble and quick delivery.