Kral Arms Puncher Jumbo Regulator By Huma-Air
Huma-Air external pressure regulator for tuning the Kral Arms Jumbo airrilfe for maximum performance
Huma-Air External Tuning Regulator For Kral Puncher Jumbo
This External PCP Regulator build by Huma-Air is specialy designed for the Kral Arms Puncher Jumbo.
The tuning regulator will reduce the outgoing pressure of your rifle’s pressure bottle according to your settings and this will result in a constant pelletspeed and better groups. It is equipped with a pressure gauge what will indicate the fill pressure of the bottle and a foster male connection to fill the rifle. The position of the gauge and and foster can be chosen left or right and they can be aligned stepless into their position so it always looks good on your rifle.
We tested the Kral Puncher Jumbo .25 (6.35mm) model, with a regulator output pressure of 140 bar shooting 33 grain pellets at a speed 950 fps. (The regulator output pressure can be set higher) 925 fps for 21 grain slugs and 1030fps with 18.1 grain pellets.
When the tuning regulator is fitted to the rifle you can read the regulator output pressure on your rifles’s pressure gauge and the fill pressure will be shown on the regulator gauge. Pressure can be set by turning the set-screw of the regulator what can be found inside the male treaded part of the regulator. A 5 minutes turn contra clockwise equals to about 6-7 bar pressure increase. This bottle regulator will be screwed in between the pressure bottle and the action of the rifle. It will ad about 58 mm of lenght.
(your original rifle’s fill connection is replaced by the regulators quick connect foster male fill connection. Do not use the original rifle bottle fill connection anymore)
The benefits of this Huma-Air, Kral Arms Puncher Jumbo tuning regulator are:
- It will give you a better shotcount and a full flat shotstring immediately.
- Higher accuracy due to the elimination of the pelletspeed fluctuations
- The solid stainless steel foster fill connection and pressure gauge can switched over from left to right
- The position of the foster and pressure gauge can be turned around for 360 degrees. So you aligned it to your own wishes.
- Under the pressure gauge there is a o-ring what make it posible to line the dialplate up straight for the eye.
- Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
- Often the rifle will make less noise due to better balance in air usage.
When you order your Huma-Air, Kral Arms Puncher Jumbo tuning regulator you will receive:
- Your regulator preset to your own wishes
- A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
- We will include a “Huma-Air regulated” breech sticker
- Fitting instructions as pdf download
Huma-Air Quality Control
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.
Pressure settings of the Huma-Air, Kral Arms Puncher Jumbo tuning regulator
Your Kral Puncher Jumbo regulator comes preset on the pressure we have tesed it and it is marked on the packing. You can set the regulator according to your wishes within the pressure range.
The output pressure will be shown on the factory pressure gauge of your airrifle.
The Huma-Air Bottle Regulator regulator comes in a wide pressure range of 60-170 bar output covering sub 12 ft/lbs and FAC models.
For testing and adjusting your regulator we recommend you our simple Testing Tool what makes it very easy to adjust your regulator without the need of emptying your pressure bottle with every adjustment
Specifications
Brand |
---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
7 reviews for Kral Arms Puncher Jumbo Regulator By Huma-Air
Alternative products
- Add to cart
Foster Female Quick Connect Coupler to G1/8BSP Male Treads
€12,96(incl. 21% VAT)In stock
- Add to cart
Black tactical pressure gauge cover for 28 mm. gauges
€5,95(incl. 21% VAT)In stock
- Add to cart
Black tactical pressure gauge cover 23 mm. for FX Impact (fill pressure)
€5,95(incl. 21% VAT)In stock
Michel Dubery (verified owner) –
I bought this for my Kral Puncher Jumbo. It is a really high quality item and fits perfectly. In order to get the best out of it for a UK gun there are some changes that make it work perfectly. I fitted a 250 bar 500cc carbon bottle, modified the transfer port, lightened the hammer and modified the hammer spring to suit. With the regulator set to 75 bar, the consistency at 11.5 fpe is amazing and the shot count is insane. If you are buying it for the UK you may need to consider who will fit it. It is easy to fit but you will have to remove the anti tamper bolts – which is pretty simple if you know what you are doing – but otherwise you might want to get a gunsmith to do it. In short, this regulator, along with the other changes, has transformed a really good rifle into something really special.
Jaume (verified owner) –
La fabricación es impecable, todo bien, pero no corresponde con mi Jumbo Dazzle. Es un modelo con botella de aire intercambiable, lleva dos. Permite más disparos entre recargas. El modelo no es para este tipo de rifle, y he perdido la inversión. Me hacía ilusión estabilizar el tiro con este rifle. Pero las roscas no son adecuadas.
Luis garrido (verified owner) –
El producto llegó rápido excelente producto, lo único malo en aduana de mi país cobro de importación muy elevado
Bc1208 (verified owner) –
The order has been processed fast and is now shipped. The regulator is top quality build and it has a simple but ingenious system to position the manometer and the gas tank coupling for filling. Congrats
bc1208 (verified owner) –
The order has been processed fast and is now shipped. The regulator is top quality build and it has a simple but ingenious system to position the manometer and the gas tank coupling for filling. Congrats
Ercan Karakus (verified owner) –
Karakuscher Airgun Solutions
All my customers happy with Huma. Thnx
Nitin Nelapudi (verified owner) –
This regulator is awesome. I installed the reg on a Kral Puncher Jumbo. and it works perfectly as advertised. I am shooting the JSB 18.1 grain pellet travelling at 925 fps consistently. The rifle is tuned and the regulator is set at 130 bar. On my gun minimal stock sanding was required to fit the regulator and aftermarket carbon fiber bottle. Thanks again Huma-Air!