Modular Airgun Silencer MOD40-3/1 (Compact+)
0 Reviews | Add review

Purchase Advice: Huma-Air Modulair Airgun Silencer or Moderator, with 3 x 40 mm and 1 x 20 mm chambers for excelent noise reduction. Available with 1/2UNFx20 or M20x1 female treads for several FX mode

€ 129,00
Price per 
Fields marked with a * are mandatory
Add to Cart

Modular Airgun Silencer or Moderator, MOD40-3/1 pre-assembled with 3x40 mm. and 1 x 20 mm. modules (Compact+)

This configuration setup is our purchase advice in terms of silencing performance and size

This silencer, or moderator, consists of a start chamber with fixed female 1/2UNFx20, or M20x1 treads (used on several FX models) two extra 40 mm long and one 20 mm long volume chambers and an endcap.
All these three chambers are filled with wired metal inserts wrapped with our special Kevlar ® enforced ballistic fibers to minimize the sound.
This system allows you to configure your own silencer in term of lenght, caliber, volume chamber size and content of the internal silencer chambers.

Optionally you can add or remove volume chambers with different length, volume and internals.
By mixing these variables you can influence the frequency and output decibels of your silencer and adjust them perfectly matching your rifle.

The benefits of the Huma-Air Modulair Airgun Silencer:


  • The possibility to make the silencer rifle specific, will allow you to reduce the output noice to an absolute minimum.
  • The precision machined volume chambers are screwed into each other making it very easy to switch or change the setup.
  • You can ad or remove 40 mm or 20 mm long volume chambers to the setup.
  • The internal parts of the 40 mm chambers consist of a metal wired sleeve with Kevlar (aramid) enforced ballistic fibers around it to reduce the sound.
  • You can also choose to use maximum volume, without the standard inserts in the volume chambers.
  • The system is caliber specific in a combined .177 /.22 version, a .25 and a .30 model. Of course you can use a .25 model also for .22 and .177 too.


Material  Aircraft Aluminium
Number of 40 mm chambers  Startpiece + 2 extra chambers
Number of 20 mm chambers  1 
Weight  198 Gram.
Lenght  166 mm.
Diameter (Outside)  40 mm.
Tread size  1/2UNFx20 or M20x1
Finish  Satin black anodizided




We use tracked priority shipping for this item. We can ship these pneumatic parts seperately packed for safe and undamaged arrival in the country of destination.
As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma-Air can not be held responsible for any legal issues in the country of the recipient.




Add review

Review must be approved by an administrator before being posted.

No reviews found.