Raw HM1000 Tuning Regulator By Huma-Air
Huma-Air replacement regulator for tuning your Rapid Air Rifle HM1000 serie airrifle.
Huma-Air Tuning regulator for the RAW HM1000 Airrifle
This unique Huma-Air regulator for the RAW HM1000 is specially designed as a “one on one” replacement regulator for the RAW rifles and solves all your original regulator problems instantly!
The regulator is very consistent over the total pressure range of the buddy bottle and it can be screwed into the action within a minute. Our ultra compact build will ad some extra CC’s of regulated volume to your rifle.
Made of massive stainless steel and vented to the atmosphere. You rifle does need to be equipped with the V-shaped fillport and pressure gauge connector.
There are 2 models regulators used in the Raw models for the “HM” and “HMX”
HM model regulator has an outside diameter of the treads of 16,6-16,7 mm and the serial has “HM”in it.
HMX model regulator has an outside diameter of the tread of about 19 mm and the serial number has an “X” in it
The benefits of the Huma-Air tuning regulator for the RAW HM1000:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- It will give you a better shotcount and a full flat shotstring immediately.
- the compact build will give you some extra regulated volume
- Easy adjustable pressure setting.
When you order your Huma-Air Tuning Regulator for the RAW HM1000 you will receive:
- Your regulator preset on the test pressure. Fine adjustment needs to be done on the rifle
- Valve push pen what screws into the regulator to open up the valve of the buddy bottle
- We will include a “Huma-Air regulated” breech sticker;
- Fitting instructions are currently not available
Pressure settings of the Huma-Air tuning regulator for the Raw HM1000:
The regulator comes preset on the most common pressure setting.
The output pressure is stepless adjustable from about 80 up to 190 bar. An half turn contra clockwise of the regulator setscrew will give about 20 bar increase of pressure
IMPORTANT NOTE FOR USERS OF THE “BEST FITTINGS” RAW REGULATOR TESTER
If you are planning to use a “Best Fittings” stainless steel Raw Regulator tester, please note these testers are cut close to the tollerances and our stainless steel regs are cut likewise. Due to the fact both items are made of the same stainless steel they are prone to fretting or galling.
Use enough and proper lubricant to prevent this.
Huma-Air Quality Control
Huma-Air regulator’s are CNC produced out of stainless steel, high grade aircraft Aluminium and bronze.
To guarantee a perfect product, every regulator is manually assembled and tested.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Specifications
Brand |
---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
14 reviews for Raw HM1000 Tuning Regulator By Huma-Air
Alternative products
- Add to cart
External Din300 High Pressure Air Regulator
€279,00(incl. 21% VAT)In stock
- Select options
Externally Adjustable Inline PCP Regulator With Integrated Fillset
From: €189,00(incl. 21% VAT)In stock
- Select options
3 Liter 300 Bar Light Weight Carbon HPA Mini Bottle
From: €320,15(incl. 21% VAT)In stock
Sean Conway (verified owner) –
Fitted this reg to my early mk2 Theoben rapid mk2 Anschutz.
Very easy installation and fantastic shot to shot consistency.
Highly recommended for any RAW or Theoben rapid.
Fernando (verified owner) –
Se recibió rápido y perfectamente embalado
Albino (verified owner) –
Bought for my theoben Rapid, but not mounted yet because I already have another Huma reg. Excellent products, work perfectly, do not increase pressure in the night.Very consistecy .
Excellent after sale Huma .
Jesus (verified owner) –
GOOD AFTERNOON, MACNIFICO EXCELLENT REGULATOR, MUCH BETTER THAN THE FACTORY ONE
Albino (verified owner) –
I bought a raw hm reg for my rapid. The product is excellent, it works very well, no assembly difficulties or unexpected events. I was helped a lot by huma support, Mr. Marc very available, very fast in replying, in short, everything at the best. I have already bought other products, a real pleasure the relationship with Huma.
Andrés Vicente (verified owner) –
Son los segundos que compro y como la primera vez impecables de muy buena calidad y regularidad. Instalados en sendas RAW TM1000 funcionan a la perfección y con una regularidad magnífica. Usando JSB Monster 4,5 dan una velocidad constante de 232 m/s. Se instalan de forma muy sencilla en las TM1000.
Andrés Vicente (verified owner) –
Ya lo he instalado en mi Raw TM1000 de HV. Es más fácil de lo que me pensaba y eso que soy muy torpón para estas cosas. Se vacía la botella al mínimo posible, se desenrosca la botella, se quita el sistema de carga rápida (también vale para los de carga horizontal) cuidado con el mini muellecito del perno de carga rápida, se quita el regulador original Raw. En el interior del regulador Raw se coloca la piececita dorada de latón hasta el fondo. Se instala en su lugar el nuevo Huma y ya de paso se cambian todas las tóricas por unas nuevas debidamente siliconadas, se vuelve a colocar todo en su sitio y ya está. ¡¡¡Chupao!!!. Mucha precaución en no perder y colocar de nuevo el muelle del perno de carga rápida. Como única precaución es llenar la botella empezando muy flojito y cuando empieza a cargar ya puedes darle más presión. ES UNA MARAVILLA DE REGULARIDAD + – 1 m/s con todo tipo de balines incluso los JSB Monster.
Gene (verified owner) –
Mine came with out any instructions on how to adjust pressure.
Sort of had to figure it out on my own.
Otherwise, the product works great.
Andrés Vicente OLTRA BARGUES (verified owner) –
Magnífica atención on line y muy buen producto con muy buen aspecto y acabado, no me he atrevido a instalarlo todavía. SERÍA MUY IMPORTANTE Y NECESARIO UNAS BREVES INSTRUCCIONES DE MONTAJE Y REGULACIÓN.
Paul (verified owner) –
Easy fit, can adjust output pressure of reg to fine set it with housing in block by removing pin disc and using small screwdriver, need 10mm ID x 1.5mm csa Oring. I can fill to 230bar without regulator creep but critically only with carbon bottle. Superb consistency.
rudyoud (verified owner) –
High quality product and service from team Huma! Transformed my Rapid mkII .25. Recommended.
Federico (verified owner) –
Hello,
I have this regulator in a Theoben Rapid and I would like to know how could I regulate the pressure in order to diminish the power.
Thanks for your attention!
Graham Ferguson (verified owner) –
Simple to fit, easy to adjust and top quality materials used.
Shot to shot consistency is vastly improved to + or – 2 fps.
Very happy.
Gerrit Arendse (verified owner) –
Ik moet zeggen de regulator van RAW zelf is al heel goed.
Maar mijn Huma-regulator is echt nog wat beter ik heb echt nog minder spread en de snelheid van de pellet is hoger en wat ook wel fijn is ik doe zo minimaal 15 tot 20 schoten meer op een vulling.