Hatsan Gladius Tuning Regulator
Huma-Air pressure regulator for tuning the Hatsan Gladius airrifle to the best posible performance and shot concistancy
Huma-Air Tuning Regulator For The Hatsan Gladius
For the Hatsan Gladius airrifle (also called Hammerli Pneuma) we have a pressure regulator available that can be pushed into the pressure tube.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.
For the real power lovers we have also an XXL volume plenum available to tune your rifle to the maximum power for extra heavy pellets. You can select it by choosing the .30 model in the options.
The benefits of the Huma-Air, Hatsan Gladius tuning regulator are:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- Maxiumum use of the air volume due to our ultra compact build.
- It will give you a better shotcount and a full flat shotstring immediately.
- Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
- Often the rifle will make less noise due to better balance in air usage
When you order yourHuma-Air, Hatsan Gladius tuning regulator you will receive:
- Your regulator preset to your own wishes
- A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
- We will include a “Huma -Air regulated” breech sticker
- Fitting instructions as pdf download
Huma-Air Quality Control
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulatiors. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve disks.
Pressure settings of the Huma-Air, Hatsan Gladius tuning regulator
Your Huma-Air, Hatsan Gladius tuning regulator comes preset on the most common pressure setting. It is equipped with a clear pressure scale label, so it’s very easy to re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.
The output pressure range is adjustable from 90-170 bar. If you have other wishes please contact us.
Aditional information:
Only when you have bought your rifle in- or after 2017, please let us know the production date of the pressure tube. This date is printed on the fillcap in month/year.
For older rifles it is not necessary.
Specifications
Brand |
---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
8 reviews for Hatsan Gladius Tuning Regulator
Alternative products
- Select options
Microbore fill hose 1/8 BSP 400 Bar
From: €17,94(incl. 21% VAT)In stock
- Add to cart
Huma-Air Regulator Tester
€99,00(incl. 21% VAT)In stock
- Add to cart
Din 300 adaptor to a male quick connect coupler (foster)
€17,96(incl. 21% VAT)In stock
- Add to cart
Foster Female Quick Connect Coupler to G1/8BSP Male Treads
€12,96(incl. 21% VAT)In stock
Paul –
Not the first time I have bought one of these good price and good quality product as always why buy any thing else
TS (verified owner) –
I bought this for my new .22 Gladius Long. Quality build, impressively fast delivery and very easy to install. (Note: Get install directions online) A consistent 900fps +/- with JSB Hades till you fall off the reg. Every Gladius air cylinder should be equipped with one of these!
Maff83 (verified owner) –
Great…excellent
roger (verified owner) –
Hatsan Gladius Long .22 Cal. / So far , great ,……… I have it tuned about mid-way , sounds quieter & I noticed my target hitting ability is more consistent . A cold front & rain came to Tx. , so I’m taking a break on plinkin’ right now , but the regulator wll make it much more fun once the sun comes back out .
Bo Eriksson (verified owner) –
Easy to install and great instructions. It gives a nice steady pressure and the result is that I get a much nicer shooting with my Hatsan Gladius.
Hans Hjort (verified owner) –
Gun: .25 cal Hatsan Gladius Long W. Lothar Walther Barrel
Contrary to Georges I really like the clever design that allows you to mount it without having to drill a hole in the air tube, I have however made some other modifications to the valve housing and do not plan to use it without the regulator but instead of drilling a hole in the tube I milled a little groove in the valve-housing to vent the regulator, I also turned of a bit of material and coned the visible part of the valve housing so now it looks like the air-tube and mechanism-housing belongs together and it shure made the install more elegant. 😉
I have only just installed it in a new gun so I assume the barrel (though made by Lothar Walther) needs a few hundred shots through it to preform really good, early chrono testing is really consistent. We’ll see about longevity but for now I’d definitely say it was money well spent.
Recommended
Joseph Greer (verified owner) –
I installed the Huma regulator in my Hatsan Gladius .177 cal. My 10 shot group size went from quarter size to dime size at 43 yards. I’m using JSB 10.34gr pellets and getting great velocity. The regulator was super easy to install, and gave no problems at all. I found the instructions to be straight forward and very easy to follow. This is a great “drop in” fix that I’m going to enjoy for a long, long time.
Thank You Huma.
Joseph Greer
USA
Georges (verified owner) –
I have purchased the model for Hatsan air tube. Now the regulator is mounted in and I have done some velocity measures. It seems to work as it should. The only issue is the venting method. I find both modes described in the manual not very practical or too invasive. In my other regulated PCP airrifle there is a tiny hole in the cylinder drilled in the right place by the factory. Such method is more « elegant » in my eyes. I will continue my tests in order to learn whether doing nothing about venting is really decreasing the performance. Generally, I am very satisfied with the regulator. There is a clear gain in the accuracy of my Gladius.
Reply of Huma-air:
Dear Georges,
Because it is a after market product the venthole is not standard in the Hatsan. If you preffer to make one it will be a ellegant solution and it will work great on your Hatsan Gladius