Kral Arms Puncher Breaker Regulator By Huma-Air
Huma-Air pressure regulator for the Kral Arms Puncher Breaker bullpup airrifle.
Huma-Air Tuning Regulator For The Kral Arms Breaker
For the Kral Arms Puncher Breaker bullpup airrifle we have a pressure regulator available that can be pushed into the pressure tube.
This Huma Kral Puncher regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.
This model is not suitable for the Puncher NP3.
This regulator with plenum is suitable up to caliber .25
The benefits of the Huma-Air, Kral Arms Breaker tuning regulator are:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- It will give you a better shotcount and a full flat shotstring immediately.
- Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
- Often the rifle will make less noise due to better balance in air usage
When you order your Huma-Air, Kral Arms Breaker tuning regulator you will receive:
- Your regulator preset to your own wishes;
- A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
- We will include a “Huma-Air regulated” breech sticker;
- Fitting instructions as pdf download
Huma-Air Quality Control
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.
Pressure settings of the Huma-Air, Kral Arms Breaker tuning regulator
The tuning regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Specifications
Brand |
---|
Shipping and Payment
We ship these parts well packed for safe and undamaged arrival in the country of destination with tracked priority shipping (unless this is specifically stated otherwise in the product text). As the purchasing party you are responsible for checking that this product is legal according to your local laws and regulations. We ship on your behalf and therefore Huma Air can not be held responsible for any legal issues in the country of the recipient.
You can pay safely and secure online by means of all major payment providers, like paypal and credit cards companies.
18 reviews for Kral Arms Puncher Breaker Regulator By Huma-Air
Alternative products
- Select options
Microbore fill hose 1/8 BSP 400 Bar
From: €17,94(incl. 21% VAT)In stock
- Add to cart
Huma-Air Regulator Tester
€99,00(incl. 21% VAT)In stock
- Add to cart
Din 300 adaptor to a male quick connect coupler (foster)
€17,96(incl. 21% VAT)In stock
- Add to cart
Foster Female Quick Connect Coupler to G1/8BSP Male Treads
€12,96(incl. 21% VAT)In stock
Jafar –
How can I to adjust it for my kral puncher breaker for 130 bar
Patrick. W (verified owner) –
Envoi et réception très rapide félicitation.!.
Le montage est très facile, la régulation parfaite pour un kral puncher breaker.
Regulé a 135 bars plus aucune inertie dès l’utilisation après la mise en pression. Parfait.
Chris (verified owner) –
Five stars and worth it. Easy and perfect fitting. Now my airtube finally is tight. No more leaking and perfect performance so far.
Eddy Martin (verified owner) –
perfect. Great service, simple to fit regulator. a+
Eduard Bogomilov (verified owner) –
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA+++++++++++++++++++++++++++++++++++++++++++++++++++!
Georgi Atanasov (verified owner) –
Hello All,
I use it on Puncher Breaker 4,5mm. The installation is easy. I installed it as it was set to 130 but maybe I need to set it to 120-125. It works very good – maximum 1 -2 m/s difference between the pellets.
Good product!
Juan emilio (verified owner) –
Muy contento muy buen producto
José Dias (verified owner) –
Great!
Easy assembly, it was immediately working perfectly. I set it to 135bar, allows 76 to 80 good shots to be made. Very satisfied. My thanks also to Huma-Air for all the professionalism and customer service.
Sathya (verified owner) –
The best and Excelent product, if you want pcp good accuracy must choice huma air
David Joseph (verified owner) –
very good product.
ted rogers (verified owner) –
i have now fitted three of these regulators in my kral guns.. shipping is fast about four days to reach me in the UK..
fitting is simple enough but you have to make sure there are no burs or imperfections in the cylinder where the regulator fits. else the plenum will bind when its being screwed in or the single O-ring wont seal properly..
all in all a good product and well worth buying..
Ennio F. (verified owner) –
I had never used HUMA regulators before and was curious to see their features. Operation is flawless as I expected. I do not appreciate instead that the regulator is sold without a replacement of the orings subject to possible damage during assembly and in the probable disassembly / reassembly due to the modification of the regulated pressure.
I had a small leak, which I later discovered was not dependent on the regulator, and the lack of spare parts worried me.
I wrote to HUMA for the correct measurements and they immediately sent a free kit. Excellent after sale service.
Five stars are deserved but I believe that providing a replacement of the external orings would be an appreciated commercial policy.
Ciao.
Marc Black (verified owner) –
Great service, simple to fit regulator and it makes a massive difference to my puncher armour. Would definitely recommend Huma products to anyone wanting to regulate or upgrade their air rifle. Will buy from them again in the future.
LUIS ENRIQUE (verified owner) –
very fast delivery and very easy
Jason D (verified owner) –
I’m so happy I bought this regulator!
I was pretty unimpressed with the performance of my new Puncher Breaker .22. Out of the box it was making 32ft/lbs with a steady decline in velocity over 28 shots(w/hammer spring adjusted all the way out). I installed the Huma reg, set to 130bar, and am now getting 42 shots at 26ft/lbs with an extreme spread of 13fps over the first 12 shots and 8fps over the remaining 30. At medium power(19ft/lbs) 58 shots, ES 18fps and at low power(8ft/lbs) 70+ shots, ES 13fps… I just got tired of shooting and stopped at 140bar.
Installation was very simple. I did file the groove in the valve body threads to be safe, but otherwise it just screws in and you’re done. That’s the big reason I went with Huma over another well known brand which has some extra spacers, 3 more o-rings and lower air volume both before and after the regulator. I’m not sure how much difference it makes, but the Huma gives more than double the volume of regulated air in the valve body which should act as a sort of “plenum”. Either way it works great!
Mike Ugolini (verified owner) –
Amazing! What a difference. Easy to install. I followed Option 2. Piece of cake.
Nikolay Kolev (verified owner) –
Thanks for your express delivery.The regulator is exactly what I expected.Very easy tunning and a good quality.I have now 20 more shots .Greetings to all your team!
Mohad Saeed (verified owner) –
Thank you huma Aires regulater is very good